Santoprene TPV Encapsulated Incoloy 825 Control Line Tubing

Short Description:

Meilong Tube specially manufactures seamless and redrawn, welded and redrawn coiled tubing which are made from corrosion-resistant austenitic, duplex, super duplex stainless steels and nickel alloy grades. The tubing is used as hydraulic control lines and chemical injection lines specially serving oil and gas, geothermal industry.


Product Detail

Product Tags

Product Introduction

Each one tubing coil is a completely continuous length without orbital welds.

Each one tubing coil is hydrostatic tested with a targeted pressure.

The test can be witnessed on site by the third party inspectors (SGS, BV, DNV).

Other tests are eddy current test, chemicals, flattening, flaring, tensile, yield, elongation, hardness for the material quality.

Meilong Tube offers coiled tubing in a wide range of corrosion resistant stainless steels, nickel alloys. We have extensive experience in product supply and innovation in this sector, from the technological advances required for subsea developments in the 1999 to the deepwater challenges of today.

Product Display

Santoprene TPV Encapsulated Incoloy 825 Control Line Tubing (1)
Santoprene TPV Encapsulated Incoloy 825 Control Line Tubing (3)

Alloy Feature

Application

Chemical Processing.
Pollution-control.
Oil and gas well piping.
Nuclear fuel reprocessing.
Components in pickling equipment like heating coils, tanks, baskets and chains.
Acid production.

Dimensional Tolerance

ASTM B704 / ASME SB704, Incoloy 825, UNS N08825, Inconel 625, UNS N06625
ASTM B751 / ASME SB751
Size OD Tolerance OD Tolerance WT
1/8’’≤OD<5/8’’ (3.18≤OD<15.88 mm) ±0.004’’ (±0.10 mm) ±12.5%
5/8≤OD≤1’’ (15.88≤OD≤25.4 mm) ±0.0075’’ (±0.19 mm) ±12.5%
Meilong Standard
Size OD Tolerance OD Tolerance WT
1/8’’≤OD<5/8’’ (3.18≤OD<15.88 mm) ±0.004’’ (±0.10 mm) ±10%
5/8≤OD≤1’’ (15.88≤OD≤25.4 mm) ±0.004’’ (±0.10 mm) ±8%
ASTM B423 / ASME SB423, Incoloy 825, UNS N08825
Size OD Tolerance OD Tolerance WT
1/8’’≤OD<3/16’’ (3.18≤OD<4.76 mm) +0.003’’ (+0.08 mm) / -0 ±10%
3/16≤OD<1/2’’ (4.76≤OD<12.7 mm) +0.004’’ (+0.10 mm) / -0 ±10%
1/2’’≤OD≤1’’ (12.7≤OD≤25.4 mm) +0.005’’ (+0.13 mm) / -0 ±10%
Meilong Standard
Size OD Tolerance OD Tolerance WT
1/8’’ ≤OD<3/16’’ (3.18≤OD<4.76 mm) +0.003’’ (+0.08 mm) / -0 ±10%
3/16≤OD<1/2’’ (4.76≤OD<12.7 mm) +0.004’’ (+0.10 mm) / -0 ±10%
1/2’’≤OD≤1’’ (12.7≤OD≤25.4 mm) +0.004’’ (+0.10 mm) / -0 ±8%

  • Previous:
  • Next:

  • Write your message here and send it to us