Monel 400 Capillary Tube Chemical Injection Line

Short Description:

A small-diameter conduit that is run alongside production tubulars to enable injection of inhibitors or similar treatments during production. Conditions such as high hydrogen sulfide [H2S] concentrations or severe scale deposition can be counteracted by injection of treatment chemicals and inhibitors during production.

To assure produced fluid flow and protect your production infrastructure from plugging and corrosion, you need reliable injection lines for your production chemical treatments. Chemical injection lines from Meilong Tube help enhance the efficiency of your production equipment and lines, both downhole and at surface.

Send email to us

Product Detail

Product Tags

Testing Abilities

Chemical	Flare	Metallurgical
Corrosion	Flatten	Positive material identification (PMI)
Dimensional	Grain size	Surface roughness
Eddy current	Hardness	Tensile
Elongation	Hydrostatic	Yield

Application

In all fields of the oil and gas industry, chemicals are injected into process lines and fluids. Take oilfield services, chemicals are used to film the side of the wellbore for improved stability. In pipelines they avoid build-up and keep the infrastructure healthy.

Other Application:

In the oil and gas industry we inject chemicals in order.
To protect the infrastructure.
To optimize processes.
To assure flow.
And to improve productivity.

Product Display

Monel 400 Capillary Tube Chemical Injection Line (3)

Monel 400 Capillary Tube Chemical Injection Line (1)

Alloy Feature

Characteristics

Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing.
Good mechanical properties from subzero temperatures up to about 480C.
Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack.
Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride.
Excellent resistance to chloride ion stress corrosion cracking.