Cheapest Factory Alloy 825 Chemical Injection Tube - Chemical Injection Line Tubing – MEILONG

Short Description:

Product Detail

Product Tags

Feedback (2)

With our leading technology also as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future jointly with your esteemed company for S32750 Control Line, Alloy 825 Hydraulic Control Line Tubing, S32750 Control Line, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.

Cheapest Factory Alloy 825 Chemical Injection Tube - Chemical Injection Line Tubing – MEILONG Detail:

Product introduction

A general term for injection processes that use special chemical solutions to improve oil recovery, remove formation damage, clean blocked perforations or formation layers, reduce or inhibit corrosion, upgrade crude oil, or address crude oil flow-assurance issues. Injection can be administered continuously, in batches, in injection wells, or at times in production wells.

A small-diameter conduit that is run alongside production tubulars to enable injection of inhibitors or similar treatments during production. Conditions such as high hydrogen sulfide [H2S] concentrations or severe scale deposition can be counteracted by injection of treatment chemicals and inhibitors during production.

Our tubing is characterized with integrity and quality to be specially used in subsea conditions in the industries of oil and gas extraction.

Product Display

Chemical Injection Line Tubing (2)

Alloy Features

Caustic Environments
Austenitic steels are susceptible to stress corrosion cracking. This may occur at temperatures above about 60°C (140°F) if the steel is subjected to tensile stresses and at the same time comes into contact with certain solutions, particularly those containing chlorides. Such service conditions should therefore be avoided. Conditions when plants are shut down must also be considered, as the condensates which are then formed can develop conditions that lead to both stress corrosion cracking and pitting.
SS316L has a low carbon content and therefore better resistance to intergranular corrosion than steels of type SS316.

Application
TP316L is used for a wide range of industrial applications where steels of type TP304 and TP304L have insufficient corrosion resistance. Typical examples are: heat exchangers, condensers, pipelines, cooling and heating coils in the chemical, petrochemical, pulp and paper and food industries.

Dimensional Tolerance

ASTM A269 / ASME SA269, 316L, UNS S31603
Size OD	Tolerance OD	Tolerance WT
≤1/2’’ (≤12.7 mm)	±0.005’’ (±0.13 mm)	±15%
1/2’’<OD≤1’’ (12.7<OD≤25.4 mm)	±0.005’’ (±0.13 mm)	±10%

Meilong Standard
Size OD	Tolerance OD	Tolerance WT
≤1/2’’ (≤12.7 mm)	±0.004’’ (±0.10 mm)	±10%
1/2’’<OD≤1’’ (12.7<OD≤25.4 mm)	±0.004’’ (±0.10 mm)	±8%

Product detail pictures:

Related Product Guide:

Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for Cheapest Factory Alloy 825 Chemical Injection Tube - Chemical Injection Line Tubing – MEILONG , The product will supply to all over the world, such as: Florence, Benin, Ireland, Since always, we adhering to the "open and fair, share to get, the pursuit of excellence, and creation of value"values, adhere to the"integrity and efficient, trade-oriented, best way , best valve" business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.

Alloy 825 Chemical Injection Line