8 Year Exporter Monel 400 Chemical Injection Line - Chemical Injection Line Tubing – MEILONG

Short Description:

Product Detail

Product Tags

Feedback (2)

We always get the job done to be a tangible staff to ensure that we can easily offer you the best high-quality and the greatest value for Capillary Coil Control Line, Nickel Alloy Control Line, Alloy 825 Capillary Tube Control Line, Good quality, timely service and Competitive price, all win us a good fame in xxx field despite the international intense competition.

8 Year Exporter Monel 400 Chemical Injection Line - Chemical Injection Line Tubing – MEILONG Detail:

Product introduction

A general term for injection processes that use special chemical solutions to improve oil recovery, remove formation damage, clean blocked perforations or formation layers, reduce or inhibit corrosion, upgrade crude oil, or address crude oil flow-assurance issues. Injection can be administered continuously, in batches, in injection wells, or at times in production wells.

A small-diameter conduit that is run alongside production tubulars to enable injection of inhibitors or similar treatments during production. Conditions such as high hydrogen sulfide [H2S] concentrations or severe scale deposition can be counteracted by injection of treatment chemicals and inhibitors during production.

Our tubing is characterized with integrity and quality to be specially used in subsea conditions in the industries of oil and gas extraction.

Product Display

Chemical Injection Line Tubing (2)

Alloy Features

Caustic Environments
Austenitic steels are susceptible to stress corrosion cracking. This may occur at temperatures above about 60°C (140°F) if the steel is subjected to tensile stresses and at the same time comes into contact with certain solutions, particularly those containing chlorides. Such service conditions should therefore be avoided. Conditions when plants are shut down must also be considered, as the condensates which are then formed can develop conditions that lead to both stress corrosion cracking and pitting.
SS316L has a low carbon content and therefore better resistance to intergranular corrosion than steels of type SS316.

Application
TP316L is used for a wide range of industrial applications where steels of type TP304 and TP304L have insufficient corrosion resistance. Typical examples are: heat exchangers, condensers, pipelines, cooling and heating coils in the chemical, petrochemical, pulp and paper and food industries.

Dimensional Tolerance

ASTM A269 / ASME SA269, 316L, UNS S31603
Size OD	Tolerance OD	Tolerance WT
≤1/2’’ (≤12.7 mm)	±0.005’’ (±0.13 mm)	±15%
1/2’’<OD≤1’’ (12.7<OD≤25.4 mm)	±0.005’’ (±0.13 mm)	±10%

Meilong Standard
Size OD	Tolerance OD	Tolerance WT
≤1/2’’ (≤12.7 mm)	±0.004’’ (±0.10 mm)	±10%
1/2’’<OD≤1’’ (12.7<OD≤25.4 mm)	±0.004’’ (±0.10 mm)	±8%

Product detail pictures:

Related Product Guide:

Our group through specialist training. Skilled expert knowledge, sturdy sense of assistance, to fulfill the provider needs of shoppers for 8 Year Exporter Monel 400 Chemical Injection Line - Chemical Injection Line Tubing – MEILONG , The product will supply to all over the world, such as: Kuala Lumpur, Johannesburg, Turkey, Our domestic website's generated over 50, 000 purchasing orders every year and quite successful for internet shopping in Japan. We would be happy to have an opportunity to do business with your company. Looking forward to receiving your message !

Alloy 625 Chemical Injection Line

Alloy 625 Chemical Injection Tube

Alloy 625 Chemical Injection Tubing

Alloy 825 Chemical Injection Tubing

Inconel 625 Chemical Injection Line Tubing

N08825 Chemical Injection Line Tube

N08825 Chemical Injection Line Tubing

N08825 Chemical Injection Tube

S32750 Chemical Injection Tubing

Super Duplex 2507 Chemical Injection Line Tubing

The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.